The key to properly painting cabinets is preparation.
With the doors removed from the boxes and all of the hardware off of the doors, you can begin lightly sanding the cabinet doors. The goal here is to rough up the surface enough to accept the primer.
A pad sander with 220-grit paper will make quick work of the flat areas and a sanding sponge is ideal for curved edges and recesses.
Spreading the doors out on two by fours stretched between sawhorses will allow you to prep and paint without moving the doors.
Before priming, wipe down all the surfaces with a damp rag to remove any dust.
If there is any greasy residue left after sanding, mineral spirits will remove it.
The next step is applying the primer, which blocks stains and promotes adhesion.
We like to use a high-volume, low-pressure spray gun to apply both the primer and the paint. These sprayers are inexpensive and very user-friendly but the operator should be protected by a respirator.
When you spray paint, it’s important to keep the spray tip a consistent distance from the surface and make slow passes back and forth.
Each pass should begin and end beyond the edge of the door so there’s no buildup of paint on the edges.
After the primer dries, you may need to putty nail holes or caulk cracks and seams.
Next, the finish paint is applied. Spraying the doors horizontally like this reduces the risk of drips, which can mar the finish and are more common with spraying than brushing.
Allow the two coats of finish paint to dry thoroughly before handling the doors and replacing the hardware.
If you’re changing the hardware, consider buying new hinges with the exact same footprint of the old ones. This will simplify installation and hide any indentations live by the old hinges.
Watch the video for details.
For more information, visit TodaysHomeowner.com.