Menu
Jackson County Sheriff’s Office retrieves vehicle from Chipola River

Jackson County Sheriff’s Office ret…

The Jackson County Sherif...

How to paint over wallpaper

How to paint over wallpaper

To successfully paint ove...

Enoch Williams – 2018 Veteran of the Year

Enoch Williams – 2018 Veteran of th…

Enoch Williams served his...

Born to dance

Born to dance

This week’s teacher featu...

Soaring sky-high for the 8th Annual Armed Forces Day

Soaring sky-high for the 8th Annual…

MARIANNA, Fla.— Sometimes...

The Times welcomes Hannah Murray

The Times welcomes Hannah Murray

Hannah Murray, 19, is a s...

First Responders recognized at RCC

First Responders recognized at RCC

Rivertown Community Churc...

2018-19 Administrators assignments are finalized

2018-19 Administrators assignments …

Jackson County Superinten...

Toddler dies in traffic accident

Toddler dies in traffic accident

The small town of Grand R...

How to replace a broken window pane

How to replace a broken window pane

To repair a broken single...

Prev Next

How to repair cracks and dents in drywall

  • Written by  By Danny Lipford
How to repair cracks and dents in drywall

Before painting a room, it’s important to repair any cracks, dents, or other flaws in the drywall. To make it easy to see flaws in a wall, hold a strong light against the wall and shine it across the surface.

 

Types of Joint Compound

Joint compound is available premixed in buckets, which take 12 to 24 hours to dry after application. Premixed joint compound dries ay evaporation, so apply thin coats and allow each coat to dry before applying more.

Joint compound is also available as a fast setting powder, which cures by chemical action in 20 to 30 minutes after it is mixed with water. Both types of joint compounds should be mixed thoroughly until smooth before applying.

 

Minor Drywall Repairs

To repair dents, small cracks, and other minor defects in drywall, apply joint compound to the wall using a drywall knife or wide putty knife.

After the joint compound has dried, apply additional coats until the defect is filled.

Sand the hardened joint compound with medium grit sandpaper using a flat sanding block or pole sander until the repair is smooth and flat. Be sure to wear an approved dust mask when sanding drywall.

 

Repairing Larger Cracks

For larger cracks or defects, apply joint compound to the wall, then cover the crack with paper drywall tape pressed into the wet compound. Cover the tape with more joint compound, and allow it to dry before sanding.

Watch the video for details.

For more information, visit TodaysHomeowner.com.

Write a comment...
awesome comments!
back to top